BytesCertification Based

Information Technology (IT)

Cisco CCNA (200-301) Exam Crash

Beginner

12h

By: Raymond Lacoste

Overview

This is a hyper-focused certification prep course for the CCNA certification class. This course is not meant as a replacement for the full CCNA course. However, individuals who understand Cisco Networking principles and need to singularly focus on the exam will find this course invaluable to cement their readiness for the exam.

Modules

1. Network Fundamentals

1.1 Power over Ethernet Modes2 min

1.2 PoE Power Classification Override2 min

1.3 Role and Function of Network Components2 min

1.4 Characteristics of Cloud-Based Architectures2 min

1.5 IAAS, PAAS, SAAS Cloud Architectures3 min

1.6 Characteristics of a Three-Tier Architecture3 min

1.7 Access, Distribution, and Core Layers3 min

1.8 Characteristics of Collapsed-Core Architecture2 min

1.9 Characteristics of a Spine and Leaf Architecture4 min

1.10 Characteristics of WAN Topologies3 min

1.11 SOHO Characteristics1 min

1.12 Dual-Homing a WAN Architecture2 min

1.13 T1 Point-to-Point Connection2 min

1.14 UTP Cabling2 min

1.15 Fiber Optic Cabling3 min

1.16 Ethernet Standards3 min

1.17 SFP Modules1 min

1.18 Straight-Through vs Cross-Over Cables4 min

1.19 Incorrect Fiber Transceiver1 min

1.20 CRC Errors and Input Errors2 min

1.21 Collisions and Late Collisions4 min

1.22 Interface State and Status4 min

1.23 Duplex and Speed Mismatch4 min

1.24 Comparing TCP and UDP4 min

1.25 Connection Oriented vs. Connectionless Application Layer Protocols3 min

1.26 Determine Best Subnet Mask Based on Number of Users4 min

1.27 Summarizing Subnets4 min

1.28 Determine Valid IP addresses in a Subnet Example 14 min

1.29 Determine Valid IP addresses in a Subnet Example 24 min

1.30 Network ID and Directed Broadcast Address3 min

1.31 Configure and Verify a /30 Subnet Between Two Routers3 min

1.32 Configure and Verify a Subnet on a SVI3 min

1.33 Creating Subnets3 min

1.34 Determining the Last Useable Address of a Subnet3 min

1.35 Determining the First Useable Address of a Subnet2 min

1.36 Subnet Masks2 min

1.37 Addressing a Network4 min

1.38 RFC 1918 Private IPv4 Addressing2 min

1.39 Shortening an IPv6 Unicast Address4 min

1.40 Configure Global Unicast Address on a Router Interface2 min

1.41 Using SLAAC and EUI-64 on a Router Interface2 min

1.42 EUI-644 min

1.43 Configuring IPv6 Loopback Interfaces1 min

1.44 Configuring a Unique Local Unicast Address on a Router Interface2 min

1.45 2001:db8::/321 min

1.46 IPv6 Address Types1 min

1.47 IPv6 Multicast Groups an Interface Joins2 min

1.48 IPv6 Multicast Addresses1 min

1.49 IPv6 Link-Local Unicast Addresses2 min

1.50 IPv6 Unique Local Unicast Addresses1 min

1.51 IPv6 Global Unicast Addresses1 min

1.52 IPv6 Anycast Addresses3 min

1.53 Verifying Windows IP Parameters3 min

1.54 Verifying Linux/Unix IP Parameters2 min

1.55 SSID (Service Set Identifier)1 min

1.56 802.11 Frame Types1 min

1.57 802.11 Standards1 min

1.58 Non-Overlapping 802.11 Channels2 min

1.59 802.11 Wi-Fi Terminology2 min

1.60 Hypervisor3 min

1.61 Virtual Machine2 min

1.62 Virtual Switches2 min

1.63 Virtualization Concepts3 min

1.64 Functions of a Layer 2 Switch1 min

1.65 Flooding Frames2 min

1.66 Forwarding Frames1 min

1.67 Building the MAC Address Table3 min

2. Network Access

2.1 Creating VLANs3 min

2.2 Connecting Phones and PCs to the Same Switch Port4 min

2.3 Protecting Unused Ports3 min

2.4 Router on a Trunk Configuration4 min

2.5 VLAN Trunking Protocol (VTP) Modes3 min

2.6 VPT VLAN Concerns When Adding an Older Switch3 min

2.7 802.1q Trunking2 min

2.8 802.1q Native VLAN3 min

2.9 802.1q Native VLAN Configuration3 min

2.10 802.1q Native VLAN Mismatch2 min

2.11 Filtering VLANs on a Trunk4 min

2.12 Configuring an Interface as an Access Port2 min

2.13 Configuring an Interface as a Trunk Port3 min

2.14 Trunk Encapsulation2 min

2.15 Troubleshooting Trunk Encapsulation3 min

2.16 Dynamic Trunking Protocol (DTP) Modes3 min

2.17 Troubleshooting DTP3 min

2.18 Show CDP Neighbors2 min

2.19 Enabling and Disabling LLDP and CDP on Interfaces3 min

2.20 Setting LLDP Delay Time2 min

2.21 The Role of CDP and LLDP with PoE2 min

2.22 Mapping a Topology with CDP and LLDP4 min

2.23 LLDP TLVs3 min

2.24 LLDP and CDP Timers2 min

2.25 Enabling and Disabling LLDP and CDP Globally1 min

2.26 EtherChannel Interface Requirements4 min

2.27 EtherChannel Overview2 min

2.28 EtherChannel Modes2 min

2.29 Configuring L3 EtherChannel Using LACP4 min

2.30 Configuring L2 EtherChannel Using LACP3 min

2.31 show lacp neighbor2 min

2.32 Troubleshooting EtherChannel Modes4 min

2.33 LACP Min-Links3 min

2.34 RSTP Port States3 min

2.35 STP Timers4 min

2.36 Determining the Root Bridge3 min

2.37 Determining the Root Port4 min

2.38 STP PortFast3 min

2.39 Changing the BID Priority2 min

2.40 show spanning-tree3 min

2.41 Types of STP3 min

2.42 BPDU Guard4 min

2.43 The Wireless LAN Controller2 min

2.44 Autonomous vs. Lightweight Aps4 min

2.45 Local AP Mode vs. Flexconnect AP mode4 min

2.46 CAPWAP2 min

2.47 Classifying Rogue Aps3 min

2.48 AP Join Process1 min

2.49 WLC Interfaces1 min

2.50 Connecting the AP to the Wired Network2 min

2.51 Connecting the WLC to the Wired Network1 min

2.52 Wireless LAN Controller LAG2 min

2.53 WLC CPU ACL1 min

2.54 Preventing a WLC Serial Session from Timing Out1 min

2.55 Management Connection Types2 min

2.56 Enabling HTTP Access on a Cisco WLC2 min

2.57 Radius vs TACACS+2 min

2.58 Configuring WLC for ISE2 min

2.59 Wireless LAN QoS Profiles1 min

2.60 Wi-Fi Client Band Selection1 min

2.61 Controlling the Number of Devices that Connect to the WLAN1 min

2.62 Reauthenticating Clients on the WLAN at Regular Intervals1 min

2.63 Preventing Wireless Clients from Communicating Directly with Each Other1 min

3. IP Connectivity

3.1 Reading the Routing Table3 min

3.2 Building the Routing Table with Dynamic Routing Protocols3 min

3.3 Installing Routes in the Routing Table (Administrative Distance)4 min

3.4 Administrative Distance Practice4 min

3.5 Installing Routes in the Routing Table (Metric)4 min

3.6 Determining Which Route will be Used to Forward a Packet Ex 14 min

3.7 Determining Which Route will Be Used to Forward a Packet Ex 24 min

3.8 Configuring an IPv4 Static Network Route2 min

3.9 Configuring an IPv4 Static Default Route2 min

3.10 When is a Static Route Installed in the Routing Table4 min

3.11 Configuring an IPv4 Floating Static Default Route4 min

3.12 Configuring an IPv4 Static Host Route2 min

3.13 Configuring an IPv4 Static Network and Host Route2 min

3.14 Configuring an IPv4 Floating Static Network Route3 min

3.15 Configuring an IPv6 Static Default Route3 min

3.16 Configuring an IPv6 Floating Static Default Route3 min

3.17 Configuring an IPv6 Static Host Route2 min

3.18 Configuring an IPv6 Static Network Route1 min

3.19 Default Information Originate2 min

3.20 Troubleshooting OSPF Neighborships (MTU Mismatch)3 min

3.21 Troubleshooting OSPF Neighborships (Timers Mismatch)3 min

3.22 Troubleshooting OSPF Neighborships (ACLs)3 min

3.23 Changing the DR/BDR Priority2 min

3.24 Electing the DR/BDR3 min

3.25 Forming an OSPF Neighbor Adjacency4 min

3.26 Enabling OSPF on an Interface (ip ospf command)3 min

3.27 Enabling OSPF on an Interface (network command)5 min

3.28 OSPF Network Types5 min

3.29 Changing the OSPF Network Type3 min

3.30 show ip ospf interface3 min

3.31 OSPF Router ID3 min

3.32 Changing the Cost of an OSPF Interface4 min

3.33 Purpose and Benefits of FHRP4 min

3.34 Types of FHRPs2 min

3.35 Virtual Ips and Virtual MAC Addresses3 min

3.36 HSRP Active and Standy Routers2 min

3.37 HSRP States2 min

4. IP Services

4.1 NAT Inside vs. Outside1 min

4.2 Configuring Static NAT3 min

4.3 Configuring Dynamic NAT3 min

4.4 Configuring PAT With a Single IP Address4 min

4.5 Troubleshooting NAT ACLs3 min

4.6 Configuring Inside and Outside NAT Interfaces2 min

4.7 Setting Time Manually in Cisco IOS4 min

4.8 NTP Master4 min

4.9 NTP Authentication4 min

4.10 NTP Source Interface3 min

4.11 NTP ACLs4 min

4.12 NTP Server Command3 min

4.13 Purpose of DNS2 min

4.14 Purpose of DHCP2 min

4.15 Configuring a Router to Use DNS3 min

4.16 DNS Records1 min

4.17 DNS Terminology2 min

4.18 DNS Operation2 min

4.19 Cisco IOS DNS Commands3 min

4.20 Purpose of SNMP2 min

4.21 SNMP Components3 min

4.22 SNMP show Commands5 min

4.23 SNMP Versions3 min

4.24 SNMPv3 Configuration5 min

4.25 SNMP Messages2 min

4.26 Syslog Severity Levels2 min

4.27 Configuring Syslog Severity Levels2 min

4.28 Reading a Syslog Message4 min

4.29 Syslog Transport Protocols2 min

4.30 DHCP Relay Agent5 min

4.31 Configure a Router as a DHCP Client4 min

4.32 IPv4 Preferred Function2 min

4.33 DHCP Pool4 min

4.34 DHCP Pool Exclusions3 min

4.35 Purpose of QoS2 min

4.36 QoS Classification3 min

4.37 QoS Marking2 min

4.38 QoS Terminology4 min

4.39 QoS Trust Boundaries3 min

4.40 Configuring SSH Access in Cisco IOS2 min

4.41 TFTP vs FTP4 min

5. Security Fundamentals

5.1 Threats and Vulnerabilities2 min

5.2 Security Technologies3 min

5.3 Anti-Replay3 min

5.4 SYN Flood Attack3 min

5.5 Mitigating Threats2 min

5.6 Physical Access Control3 min

5.7 Elements of a Security Program3 min

5.8 Security Best Practices2 min

5.9 Local Username and Password Authentication3 min

5.10 Local Username and Password Privilege Level 152 min

5.11 Enable Secret2 min

5.12 Identifying Which Password Will be Used2 min

5.13 Service Password-Encryption2 min

5.14 Enable and Username Algorithm – Type3 min

5.15 Console and VTP Line Passwords3 min

5.16 Transport Input on the VTY Lines3 min

5.17 Password Managers2 min

5.18 Multi-Factor Authentication4 min

5.19 Digital Certificates for Authentication2 min

5.20 IPSec Overview3 min

5.21 IPSec Modes3 min

5.22 IPSec Framework3 min

5.23 GRE Over IPSec2 min

5.24 DMVPN and GETVPN3 min

5.25 Configuring an ACL Example 12 min

5.26 Configuring an ACL Example 23 min

5.27 Configuring an ACL Example 33 min

5.28 Troubleshooting an ACL Example 13 min

5.29 Troubleshooting an ACL Example 23 min

5.30 Troubleshooting an ACL Example 33 min

5.31 Troubleshooting an ACL Example 43 min

5.32 Dynamic ARP Inspection4 min

5.33 Configuring Dynamic ARP Inspection3 min

5.34 DHCP Snooping4 min

5.35 Configuring DHCP Snooping2 min

5.36 Port Security Violation Modes3 min

5.37 Port Security Sticky Learning2 min

5.38 Port Security Static Learning1 min

5.39 Configuring Port Security4 min

5.40 Err-Disabled4 min

5.41 AAA1 min

5.42 Wi-Fi Encryption Standards2 min

5.43 L2 vs L3 WLC Security Settings1 min

5.44 Opportunistic Wireless Encryption1 min

5.45 Configure a WPA2 PSK Wireless LAN in the GUI3 min

5.46 Configure 802.11r in the WLC GUI2 min

5.47 Configure 802.11w in the WLC GUI1 min

5.48 Configure a WPA2 Enterprise Wireless LAN in the GUI1 min

5.49 Configuring User Wireless Access Limits in the WLC GUI2 min

6. Automation and Programmability

6.1 Benefits and Needs of Network Automation2 min

6.2 Traditional vs Control Based Architecture4 min

6.3 Data Plane2 min

6.4 Control Plane3 min

6.5 Southbound APIs1 min

6.6 Northbound APIs2 min

6.7 CRUD and REST HTTP Methods1 min

6.8 REST2 min

6.9 HTTP Status Codes2 min

6.10 HTTP Headers1 min

6.11 Ansible2 min

6.12 Configuration Management Terms2 min

6.13 JSON Data Types3 min

6.14 JSON Formatting4 min

Ready to Elevate Your Team's Learning?

Talk with our sales team to see how StormWind can transform the way your organization trains and grows.

CONTACT SALES